Sprøytepistol med overkopp for proffbrukere. Perfekt billakkeringspistol.
Nøyaktig sprøytebilde bidrar til jevnt og godt resultat.
Leveres med luftkappe TE10, som er en Trans Tech kappe som gir mindre lakk og bruker svært lite luft. Passer best til løsemiddelbasert lakk, men kan også brukes til vanntynnbar base coat.
Stabil og ergonomisk lakkpistol som sitter meget godt i hånda.
Tekniske data
Luftforbruk: | 270 liter/min |
Lakkforbruk: | 160-190g/min |
Sprøytebredde: | 290-310mm |
Anbefalt arbeidstrykk: | 2 bar |
Vekt: | 778 gram inkl. kopp |
Luftinngang: | 1/4" BSP utvendig gjenger |
Dyse: | 1,2 og 1,3mm (leveres med 1,3mm montert) |
Luftkappe: | TE10 Trans Tech |
Volum overkopp: | 560ml |
Farge: | Blå eller Gull |
- Trans-tech high transfer efficiency, not HVLP and best suits solvent basecoat - though can be used for waterbased and also lacquer - this is a good all rounder to do multiple tasks.
- Suits basecoat application in a more traditional (non HVLP) style.
- Particularly suits solvent basecoats however is sometimes favoured / recommended by some paint companies for waterborne basecoat application.
- This is a 'Trans-tech' air cap, which is compliant but is not HVLP. This means the spray pattern is more eliptical (squat/rounded) than the open flat (wide fan width) pattern found on the H1 air cap. See info pack button above for more info.
- Atomisation Technology: High Efficiency
- Air Flow L/min: 270 (9.5 cfm)
- Fluid g/m: 160 - 190
- Pattern Height: 290 - 310mm
- See more at: https://www.spraygunsdirect.co.uk/devilbiss-gti-pro-gravity-spray-gun-professional-s-favourite-many-tailored-options.html#sthash.nsmEYSxN.dpuf
- Trans-tech high transfer efficiency, not HVLP and best suits solvent basecoat - though can be used for waterbased and also lacquer - this is a good all rounder to do multiple tasks.
- Suits basecoat application in a more traditional (non HVLP) style.
- Particularly suits solvent basecoats however is sometimes favoured / recommended by some paint companies for waterborne basecoat application.
- This is a 'Trans-tech' air cap, which is compliant but is not HVLP. This means the spray pattern is more eliptical (squat/rounded) than the open flat (wide fan width) pattern found on the H1 air cap. See info pack button above for more info.
- Atomisation Technology: High Efficiency
- Air Flow L/min: 270 (9.5 cfm)
- Fluid g/m: 160 - 190
- Pattern Height: 290 - 310mm
- See more at: https://www.spraygunsdirect.co.uk/devilbiss-gti-pro-gravity-spray-gun-professional-s-favourite-many-tailored-options.html#sthash.nsmEYSxN.dpuf
- Trans-tech high transfer efficiency, not HVLP and best suits solvent basecoat - though can be used for waterbased and also lacquer - this is a good all rounder to do multiple tasks.
- Suits basecoat application in a more traditional (non HVLP) style.
- Particularly suits solvent basecoats however is sometimes favoured / recommended by some paint companies for waterborne basecoat application.
- This is a 'Trans-tech' air cap, which is compliant but is not HVLP. This means the spray pattern is more eliptical (squat/rounded) than the open flat (wide fan width) pattern found on the H1 air cap. See info pack button above for more info.
- Atomisation Technology: High Efficiency
- Air Flow L/min: 270 (9.5 cfm)
- Fluid g/m: 160 - 190
- Pattern Height: 290 - 310mm
- See more at: https://www.spraygunsdirect.co.uk/devilbiss-gti-pro-gravity-spray-gun-professional-s-favourite-many-tailored-options.html#sthash.nsmEYSxN.dpuf